home *** CD-ROM | disk | FTP | other *** search
-
- Anfy Fluid 2.1 - Copyright (C) by Fabio Ciucci 1997/98
-
-
- This applet can simulate fluid wavings.
- Remember that are needed both flud.class and Lware.class.
- You must upload these 2 .class files and insert the <applet> tag on your
- html document to add this applet to your page.
- This applet is fully parametrized, so you can generate all kinds of fluids
- you want. Here an example of what you have to write in the html (the
- things anfter the ; are comments with min-max values acceptet):
-
-
- <applet code="fluid.class" width=200 height=200> ; Name, Width, Height
- <param name=credits value="Applet by Fabio Ciucci (www.anfiteatro.it/java.html)">
- <param name=regcode value="NO"> ; Register code (if you have it)
- <param name=reglink value="NO"> ; URL where go optionally when clicked
- <param name=regnewframe value="YES"> ; Reglink opened in new frame?
- <param name=regframename value="_blank"> ; Name of new frame for reglink
- <param name=statusmsg value="Fluid applet"> ; Statusbar message
- <param name=res value="1"> ; resolution (1 .. 8)
- <param name=autodesign value="YES"> ; Auto design ("YES" or "NO")
- <param name=density value="4"> ; Density of fluid (2 .. 6)
- <param name=fishnum value="0"> ; Number of fishes (0 .. 2)
- <param name=rainsize value="0"> ; Size of circular rain (0 = OFF)
- <param name=rainfactor value="10"> ; Circular rain factor
- <param name=srainsize value="0"> ; Size of square rain (0 = OFF)
- <param name=srainfactor value="10"> ; Square rain factor
- <param name=volcano value="NO"> ; Volcano's magma mode (YES, NO)
- <param name=textscroll value="fluidscr.txt"> ; File for scrolltext or "NO"
- <param name=textoffset value="140"> ; Txtscroll y offset
- <param name=textspeed value="1"> ; Txtscroll speed
- <param name=textfont value="Arial"> ; Txtscroll font name
- <param name=textbold value="NO"> ; Txtscroll bold ("YES" or "NO")
- <param name=textsize value="24"> ; Txtscroll font size
- <param name=textshadow value="YES"> ; Txtscroll shadow ("YES" or "NO")
- <param name=TextColR value="200"> ; Txtscroll color (red component)
- <param name=TextColG value="255"> ; Txtscroll color (green component)
- <param name=TextColB value="190"> ; Txtscroll color (blue component)
- <param name=TextSColR value="20"> ; Txtscroll shadow col. (red c.)
- <param name=TextSColG value="20"> ; Txtscroll shadow col. (green c.)
- <param name=TextSColB value="50"> ; Txtscroll shadow col. (blue c.)
- <param name=TextJumpAmp value="0"> ; Txtscroll jump aplitude
- <param name=TextJumpSpd value="0"> ; Txtscroll jump speed
- <param name=TextSineAmp value="0"> ; Txtscroll sineshape amplitude
- <param name=TextSineSpd value="0"> ; Txtscroll sineshape movement
- <param name=TextSineAngle value="0"> ; Txtscroll sineangle / pixel
- <param name=memdelay value="1000"> ; Memory deallocation delay
- <param name=priority value="3"> ; Task priority (1..10)
- <param name=MinSYNC value="10"> ; Min. milliseconds/frame for sync
- Sorry, your browser doesn't suppor Java. ; Message for no java browsers.
- </applet> ; End of applet tag
-
- ---------
-
-
- Here detailed instructions about how to change parameters:
-
- The credits parameter can't be changed otherwise the applet will not work.
-
- To activate the reg parameters read the shareware registration notes.
- In the "regcode" parameter you have to place the registration code you
- purchase from the author. If it is correct and the applet is run from the
- registered domain name, you can use "reglink" parameter, where you can specify
- an URL where bring user when the applet is clicked.
- If you set to "YES" regnewframe, you can specify a frame where load the
- reglink:
-
- "_blank" : To load the link in a new blank unnamed browser window.
- "_self" : To load the link into the same window the applet occupies.
- "_parent" : To load the link into the immediate FRAMESET parent.
- "_top" : To load the link into the top body of the window.
-
- Otherwise the frame name, for example "myframe1".
-
- The height for good results must be 200. You can change the width.
- res is a sort of zoomer.
-
- If you set to "YES" the "autodesign" parameter, an automatic slideshow of the
- effects will be executed, and next parameters are ignored.
-
- If you set to "NO" the autodesign, you have to configure effects manually:
-
- The "density" parameter (2 .. 6) controls the density if fluid. Lower values
- mean more fluid liquid, so waves dead fast. Higher walues cause a slower
- decadence of the waves.
-
- You can insert up to 2 fishes, with "fishnum" parameter.
-
- Other effects are: rain and srain.
-
- Set the parameter "rainsize" to more than 0 to activate the circular rain.
- The "rainfactor" parameter works as "timer" between one drip and another.
- Setting "rainfactor" to 0, a new drip will appear every frame.
- Higher values mean more distance between one drip and another.
-
- The "srainsize" will determine a square rain. If it is set to zero, no
- rain. Values higher or equals to 1 will generate rain.
- To control it use "srainfactor" as seen for "rainfactor".
-
- You can enable more than one effect at the same time.
- The "volcano" parameter, if set to "YES" transform the water in lavic magma,
- for infernal ambientations.
-
-
-